PVA Toilet Descaler Booster x20 - PB10:20

• 1 sachet makes 1L of chemical
• 20 sachets per pack
• Palm free 
• Phosphate free 
• Made in the UK
• CHSA approved 

Instructions for use 

• Part fill a the bottle with warm water and add one Toilet Descale Booster Sachet. Replace the cap and ensure the dispense nozzle is in the closed position. Vigorously shake the bottle until the solution 
  colour changes from clear to blue to green. Carefully remove the cap; there will be a slight hiss as CO2 produced by the effervescence of the sachet contents is released. Top the bottle up with cold water, re-attach the cap and shake for a few seconds to mix, then add the booster, re attach the cap and mix once more. 
• Once mixed the solution should be allowed to stand for 20 to 30 minutes to cool to room temperature,during which time viscosity will develop.
• For routine cleaning, flush the toilet, open the dispense nozzle on the duck and squirt around the top of the bowl, directing the jet under the rim. Allow the liquid to run down the bowl into the trap water,where the colour will change from green to a fresh blue. After approximately 5 mins flush to rinse.
• For deep cleaning, flush the toilet, use a toilet brush to pump and lower the level of water from the base of the bowl, and use the brush to loosen any debris. Spray toilet cleaner around the bowl and rim. Allow the liquid to run down the bowl into the water contained in the trap, where the colour will change from a green to a fresh blue. After approximately 5 minutes use a brush to clean around the bowl and in the bottom of the pan, then flush to rinse.
• Note: This product should only be used for cleaning toilet bowls, it is not recommended for toilet seats, or for other bathroom surfaces such as tiles, tile grouting or hand basins.
• Note: This product must never be mixed with or be used in conjunction with Bleach; this will produce Toxic Chlorine gas and breathing difficulties.