PVA Pine Toilet Cleaner 1L x20
Ref: 102-0289
In stock
SKU
102-0289
£22.80
£19.00
Multiple
| Qty | Discount | Cost |
| 5 | 16% | £19.04 £15.87 |
| 10 | 23% | £17.56 £14.63 |
Delivery:
Next day delivery if Ordered before 1:00pm (Monday-Thursday)
Frequently bought together...
PVA Toilet Cleaner Pine Fragrance x20 - PVA A8:20
The PVA toilet cleaner uses PVA Hygiene’s unique CCS4 technology. The product is a blend of organic acids, biodegradable surfactants and plant based thickening agents. The PVA toilet cleaner is designed for routine cleaning and descaling of toilet bowls. It is safe for use on normal materials of construction, but is not suitable for cleaning tile grouting.
In areas of very hard water, or where toilets have been allowed to become heavily scaled, this product can be used in conjunction with the PVA toiler descaler booster cleaner 102-0292 PVAPB10:20.
Features and benefits;
- Supplied in a convenient dissolvable paper sachet within a compostable container
- 1 sachet equals 1L of chemical use - 0.99per L
- Soil removal
- Palm Free
- Phosphate Free
- Colour Indicator
- Pleasant pine fragrance
- FSC Certified paper
- No Single Use Plastic - reduces waste by 90% compared to using traditional commercial cleaning solutions. No containers to be recycled. Instead Multi use plastic re-using the same container time and time again, reducing the environmental footprint.
- Made in the UK
- CHSA approved product
- 1 sachet makes 1L of chemical
- 20 sachets per pack
- Palm Free
- Phosphate Free
- Colour Indicator
- Pleasant Pine Perfume
- Made in the UK
- CHSA approved product
Instructions for use
- Part fill a bottle with warm water and add one Toilet Cleaner Sachet. Replace the cap and ensure the dispense nozzle is in the closed position. Vigorously shake the bottle until the solution colour changes from clear to blue to green. Carefully remove the cap; there will be a slight hiss as CO2 produced by the effervescence of the sachet contents is released. Top the bottle up with cold water, re-attach the cap and shake for a few seconds to mix. Once mixed the bottle should be allowed to stand for 20 to 30 minutes to cool to room temperature, during which time viscosity will develop.
- For routine cleaning, flush the toilet, open the dispense nozzle on the bottle and squirt around the top of the bowl, directing the jet under the rim. Allow the liquid to run down the bowl into the trap water,where the colour will change from green to a fresh blue. After approximately 5 mins flush to rinse.
- For deep cleaning, flush the toilet, use a toilet brush to pump and lower the level of water from the base of the bowl, and use the brush to loosen any debris. Spray toilet cleaner around the bowl and rim. Allow the liquid to run down the bowl into the water contained in the trap, where the colour will change from green to a fresh blue. After approximately 5 minutes use a brush to clean around the bowl and in the bottom of the pan, then flush to rinse.
- In circumstances where excessive scale has developed, use this product in conjunction with the Toilet Descale Booster Sachet.
- Note: This product should only be used for cleaning toilet bowls; it is not recommended for toilet seats, or for other bathroom surfaces such as tiles, tile grouting or hand basins.
- Note: This product must never be mixed with or be used in conjunction with Bleach, this will produce Toxic Chlorine gas and breathing difficulties.
