Viper ROS1300 Ride-on Sweeper

Viper ROS1300 Ride-on Sweeper

The VIPER ROS1300, designed to be easy to operate, will require very little maintenance, and being a rugged, consistent performer for daily sweeping of hard floors, both indoor and outdoor.

From large warehouses, industrial areas, commercial complexes, schools and colleges, the VIPER ROS1300 is ideal for these environments. By keeping dust, and debris under control quickly and efficiently.

Simple and intuitive controls like the one-touch start will help you get to work on cleaning and stay in control. Smart, tool-free maintenance will ensure your operator will not be phased by any time-consuming routine tasks. Built for all round safety, this sweeper maintains high-productivity while ensuring a safer working environment for everybody. Optimised for cleaning at large scale in addition to having a huge capacity to keep sweeping up slopes and inclines the ROS1300 is a truly productive performer. 

• Maintain high productivity whatever your application, with optimal dust and debris collection and powerful rear-wheel drive – even up slopes
• Enjoy one touch start that activates all main functions instantly and tool-free maintenance for easy installation and removal of the broom and brushes
• More sweeping, less dumping with high capacity 130L hopper on wheels and optional three mini containers for convenient debris dump
• Optimised for operators with cup holder, USB port, built-in device storage and water level indicator for dust control misting system
• Safety-centric design with warning beacon, front LED light, speed-reduction during turns and ergonomic adjustable seat.

Instructions for use

Before starting the machine

• Remove the red cap and fill in the solution tank with fresh water.
• Check level with red ball on the side of the machine. Finish filling.
• Insert the operator key and start the machine.
• Adjust the seat to the correct working position.
• Press the OneTouch button to enable sweeping, the brooms will lower automatically.
• The brooms and vacuum will start when when the drive pedal is pressed - then start sweeping.
• Turn the knob to adjust and set maximum speed with fully pressed drive pedal.
• Turn the side brooms speed adjustment knob to set correct speed of the side brooms.
• Press the water misting button to start the water spray for side brooms for outdoor use or dusty application.
• Press the front flap pedal to open the front flap for sweeping larger debris.
• Press the light button to turn on the front light.
• If installed, the blue light is turned on by long pressing the light button.
• The horn button is pressed to sound the horn and used to indicate presence while operating.
• Use the backwards button to use the machine in reverse.
• Push the side broom button to take up the side brooms and use the machine with only the main broom.
• Push the side broom button again to bring the side brooms back down.
• Use the turning signals when turning left or right. The turning signal are located at the rear of the machine.
• Push the filter cleaning button to shake and clean the filter.
• Press and hold the button to set the filter cleaning to automatic mode - the LED flashes to confirm. The filter will be shaken every 10 minutes.
• Dual safety with automatic electronic parking brake as ell as foot operated manual brake and parking brake.
• Use the OneTouch button to stop all function on the machine.

After Cleaning Maintenance

• Turn off the machine using the key.
• Removre the hopper and empty it.
• If using the wheeled hopper with optimal mini containers, empty one at a time.
• Remove the rear panel and check the filter.
• After reinstall filter and hopper.
• Remove, clean and inspect the main broom.
• Clean the machine with a wet cloth.
• Charge the machine by using the rear external charging connections.

Comes with an optional on board charger and an external charger.

*Warranty applies for 12 months*