PVA Glass S/Steel Cleaner x20

PVA Glass & Stainless Steel Cleaner 750ml x20 - PVA B5:20

This PVA glass and stainless steel cleaner is a dual purpose, lightly fragranced detergent for removing marks and greasy residues from windows, mirrors, car windscreens, decorative stainless steel and other shiny/reflective surfaces. The water soluble sachets allow for convenient and safe dosing. Each sachet contains a blend of biodegradable chelates, together with alkaline builders and plant based biodegradable surfactants. Ideally to be used in conjunction with the PVA printed bottle ref 103-0714 PVA C5. 

Features;

• Supplied in convenient water-soluble PVA-OH and Paper sachets within a compostable container
• Phosphate Free
• Identifiable Colour
• 1 sachet equals 750ml of chemical use - 0.62 per 750ml 
• 20 sachets per pack 
• FSC Certified paper
• No Single Use Plastic - reduces waste by 90% compared to using traditional commercial cleaning solutions. No containers to be recycled. Instead Multi use plastic re-using the same container time and time again, reducing the environmental footprint.
• Made in the UK
• CHSA approved product

This unique formulation is contained within a PVOH or paper film that dissolves at the point of use. The sachets are dry, compact and light, they reduce storage space and transportation costs, and heavily reduce the environmental implications often associated with delivering cleaning supplies. The sachets are packed in planet friendly packaging, that can either be composted or recycled, helping you to eliminate single-use plastic from your current cleaning procedure. 

Instructions for use 

• Remove any gross debris from the surface, place one sachet into the empty trigger spray bottle and fill with water to the 750ml mark. Replace the trigger head and shake until the sachet has dissolved (note warm water will aid the rate of dissolution but is not essential). Lightly spray the solution onto a cloth and wipe the surface, then buff to a shine with a lint free cloth or paper towel. 
• Note:- It is essential to spray lightly, as over application will make buffing dry time consuming and risks a smeared finish. 
• The product should be used with care on highly molded/complex shapes made from Perspex and Acrylic plastic. Care should be taken of decorative print finishes.